What is no-wax chemistry?

 What is no-wax chemistry?

 

The most of no-fluor wax systems (base waxes, powders, liquids, speeders etc.) are still based on waxes (different types, blends of waxes enriched with different additives).

 

All wax-based products rely especially on the mechanical retention in the ski base, especially in amorphous regions of the ski base. Chemical bonds of wax-based products are normally too weak.

 

Mechanical retention in the ski base has its limits which cannot be overcome.

 

That’s the reason why several ski wax manufacturers approached the no-wax way.

 

How it works?

 

No-wax chemistry products contain normally 3 different components. First component is an etching agent which is used to etch / change the surface of the ski base slightly in order to prepare it for absorbing gliding agents. Second component is a binder / carrier which is normally a polymer with low-melting temperature which is filled with the respective gliding agents. Binders are needed because the gliding agents normally do not stick to UHMWPE even if etched slightly. Third component are gliding agents themselves which are very often nano-particles of different substances.

 

After application the ski base surface is etched slightly, the binder filled with gliding agents is entering the slightly disordered ski base surface and unneeded substances evaporate as a result of which the no-wax product will change the status from liquid to solid. Finished. Ski base is coated with a polymer-like agent continuously.